Shelly Qubino Wave Pro 3
- Buy 2 for €80,70 each and save 5%
- CHOOSE your delivery day, time and location
- EASY return within 14 days
- FREE ADVICE call +31 85 029 05 78
- FREE SHIPPING above € 75,00
- Ordered till 5PM SHIPPED TODAY
- Pay afterwards with Afterpay/Riverty
Automate your group box or power circuits easily and inexpensively with this smart Shelly Qubino Wave PRO 3 DIN-Rail switch. Switch or automate up to 3 groups potential-free with your smartphone from anywhere in the world, or set up convenient switching schemes and scenes via your Z-wave Hub/Gateway. And with the potential-free relays so you can also use them to switch DC or 3 phase.
When you connect your lights and appliances to one group, for example, you can switch them on/off with one push of a button, handy for the office. Never forget to turn off the lights again, prevent leakage current from standby equipment, and save on energy costs. Via the potential-free relay (dry contact), you can switch any voltage you want. Voice control with Google Assistant or Amazon Alexa is also possible, provided your Z-wave hub supports it.
Shelly Qubino Wave Pro 3
This smart Z-wave Plus DIN-Rail switch can be built into your group box, and switches 3 groups or 3-phase of up to 16A (3680W), total max 48A. Install the Shelly Wave PRO 3 and connect via Z-wave for easy pairing to your Z-wave gateway. Click Add Device in the menu and follow the instructions. Then you can control the switch wirelessly with the App from anywhere in the world, record it in smart scenes (scenarios) and set timers.
Don't forget to order your RC-Snubbers along if necessary! Use RC-Snubbers on any output for induction loads such as fans, motors, tube motors, hoovers or loads that cause voltage spikes during switching on or off. The RC snubber (0.1 µF / 100 Ω / 1/2 W / 600 VAC) is connected parallel to the device (between the switched phase and neutral).
The Shelly Qubino wave PRO 3 has the Z-wave 800 chip on board, automatic addition via SmartStart, S2 Security, OTA updates, but thus requires a compatible Z-wave Hub/Gateway.
Works with
* Apple HomeKit requires a Homey or HA linked to Apple Home App
** SmartThings requires Shelly wave Edge Driver
FEATURES
Advantages and disadvantages
Z-wave Plus DIN-Rail switch | |
Z-wave 800 series chip on board | |
Works as a Z-wave repeater (Z-wave Mesh-Network) | |
3 potential-free relays | |
Control up to 3 groups, 3-phase or other voltages | |
Possibility to connect switches/pulse switches | |
SmartStart for easy pairing | |
S2 security | |
OTA updates, provided your Hub supports this | |
110-240VAC | |
Output max 3x16A/3x3680W, total max 48A. | |
Max 240VAC and 30VDC relay switching | |
Protected against overheating | |
Flush-mounted distribution board, DIN-Rail | |
Scene activation via Hub/App | |
OTA firmware updates | |
5 Year Carry-in warranty! | |
Requires a compatible Z-wave Hub/gateway | |
Requires electrical engineering knowledge for installation in distribution board | |
No current measurement |
DOWNLOADS
Shelly Wave PRO 3 Manual (ENG/MULTI) |
Voltage: | 110-240VAC |
Power: | Max. 3x16A, total 48A |
Usage: | <0.3W |
Protocol: | |
Dimension: | 96 x 53 x 59 ± 0.5 mm |